• Residence
• Let Instructions
• Wiring a Perko Power Switch

Perko Let Guides

See all Assist Courses

The obvious (and most typical) is simply to utilize they to turn down your battery while in space so that your power supply will not strain as quickly and is all set whenever you are. Like all Perko merchandise, these time-proven switches are available in america. All changes is ignition secured.

But also for ships with several engines and multiple battery packs, using several on-off changes (occasionally along with a selector switch) provides various value. Run with a selector switch in each situation (discover selector switches) might not fully recharge all electric batteries. But incorporating on-off changes to the circuit you’ll be able to force the alternator to charge the battery you prefer charged.

When you have any queries or question about how to make use of, install or wire any electric battery change, seek advice from a professional marine electrician.

Battery pack detachment changes let manage the overall usage of electrical power on-board. You can use them for connecting or disconnect electrical gadgets from the electrical system. They help prevent battery strain during intervals of a sedentary lifestyle. They enable an easy and simple way to closed the entire electrical system in an urgent situation. An optional important lock helps you to stop unauthorized use of the vessel.

Perko electric battery switches are made for surface installation. Standard responsibility detachment switches have vivid red polycarbonate reinforced housings for safety with huge easy-to-turn black colored switches. The houses of heavy weight changes are purple fiber-reinforced polycarbonate.

Models with an “Alternator area Disconnect” element provide coverage for Non-Unitized Alternators should the change accidentally feel turned to the “OFF” situation because of the system run.

Extreme conductivity guys were long enough to address significantly more than 1 cable tv and sufficiently strong for torque needed for secure contacts. Optional spacer band (PN 0462DP0RED) enables employing big cables.

Battery Pack Turn Wiring Diagrams

Turn Position shows which power supply (#1, All, #2) is actually connected to the engine.

This permits either engine are started by either power supply. Slot turn means which power supply (#1, All, #2) was linked to the port system and starboard change shows which battery (#1, All, number 2) are linked to the starboard engine.

The permits both machines to be used to cost Lighting Batteries. Interface switch indicates which power supply (interface best, slot lights merely) is attached to the slot system and the starboard switch means which battery pack (starboard just, starboard lighting effects just) are linked to starboard engine.

Perko Power Switches

The Perko Dual Battery Selector change allows incorporating a supplementary electric battery for add-ons.

This turn gives the versatility of option between batteries or merged operation of both batteries in parallel for starting or charging you.

The Perko individual battery pack detachment change enables battery pack becoming shut down from the electric system whenever boat isn’t being used. They can in addition serve as an emergency major disconnect switch in case of an electric challenge.

Perko’s 8501 show battery selector switches are among the hottest battery pack changes ever before developed. Their own utilization of the standard Perko bolt circle produces simple installations, whether brand new or as a replacement.

These heavy-duty changes is rated at as much as 380 amps constant and 850 amps intermittent (discover standards). An alternator area detach function is standard.

It can be difficult to fit huge wiring through the orifice on the straight back of battery pack switches. This spacer band solves that challenge. The band merely snaps on the straight back of every Perko 8501 or 9601 series battery pack turn and provides another 5/8″ of approval room for huge wires.